Minka Lavery 2913-281-L Manuale delle Istruzioni Scaricare il pdf

INSTALLATION INSTRUCTIONS FOR 2913-281-L

For LED Wall Mount Fixture

WAR N I NG ! S H UT P OW E R O F F AT F US E O R CI RC U I T B R E AK E R .

AV E R T I S S E M E N T ! C O U P E R L E C O U R A N T A U N I V E A U D E S F U S I B L E S O U D O D I S J O N C T E U R .

Fig.1F

Fig. 2

Fig.3

IMPORTANT: Fixture should be installed by a

qualified electrician to ensure proper wiring and

installation.

Dimmable with C-L (CFL & LED) type and

Incandescent/Halogen type dimmers

II 804

MOUNTING THE FIXTURE (Fig. 1)

1. Shut off power at the fuse box or circuit breaker box. If necessary

remove the existing fixture and mounting hardware from the wall.

2. Carefully remove the new fixture from the carton and check that

all parts are included as shown in the illustration.

3. Position mounting plate (A) on the wall, and mark the location of

the two drywall anchors (G). Pre-drill the holes for the drywall

anchors (G), then insert the drywall anchors (G) into the wall.

4. Attach the mounting plate (A) to the outlet box using outlet box

screw (B) (Size: 8-32*1/2’’L) and wood screws (F). The side of

the mounting plate marked “GND” must face out.

CONNECTION THE WIRES (Fig. 2)

5. Connect the electrical wires as shown in Fig.2, making sure that

all wire connectors are secured. If your outlet has a ground wire

(green or bare copper), connect the fixture's ground wire to it.

Otherwise, connect the fixture's ground wire directly to the

circular strap using the green screw provided. After the wires are

connected, tuck them neatly into the outlet box.

FINISHING THE INSTALLATION (Fig. 1)

6. Align the fixture (E) over mounting plate (A) and secure with

screws (D).

Your installation is now complete. Return power to the outlet box and

test the fixture.

CAUTION /ATTENTION: When handling the fixture, do not apply

pressure to the LEDs. Hold the fixture by the base or fixture body

(E) only.

Replacing LED module (Fig.3)

The LED module can be replaced by a qualified electrician without

cutting the wire and without damaging the decorative element to

which the fixture is attached. See installation steps for more details

(Fig 3.)

Warning: Turn off power at the fuse box or circuit breaker

before replacing the LED module.

a. To remove the fixture from the wall: loosen screws (D) and

remove the wire connectors. Then place the fixture on a clear

flat surface.

b. Loosen screws (P) and remove frame (L) and shade (K).

c. Loosen screws (J), screws (M), wire fastener (N) and carefully

remove LED module (I).

d. Reverse steps a-c for installing the new LED module.

Note: The LED module should be provided by a specified supplier.

For LED Wall Mount Fixture 1

Sommario

Pagina 1 - For LED Wall Mount Fixture

INSTALLATION INSTRUCTIONS FOR 2913-281-LFor LED Wall Mount FixtureWAR N I NG ! S H UT P OW E R O F F AT F US E O R CI RC U I T B R E AK E R

Commenti su questo manuale

Nessun commento

Minka Lavery 2913-281-L Manuale delle Istruzioni

Navigare online o scaricare Manuale delle Istruzioni per no Minka Lavery 2913-281-L. Minka Lavery 2913-281-L Instructions / Assembly Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi no Minka Lavery 2913-281-L